|
There are many
types of roofing solutions and products available these days so
let’s look at a few. The IBR profile is one of the most commonly
used on roof sheets and is available in a thickness of 0.53 and
0.58mm. Aluminium, steel and galvanized roof sheets use this profile.
Although galvanized and steel roof sheet s are much cheaper than
aluminium sheets aluminium sheets do last much longer and doesn’t
lose its color as quickly neither. Aluminium roof sheets also known
as Zincalume is much more durable than steel and doesn’t need
to be painted with a UV resistant paint like Silvacote to protect
it.
All though
Silvacote is a really great product you still need to refurbish
your roof sheets once every 5-7 years. Silvacote does however protect
sheets from becoming really hot and you can also use it on waterproofing
membranes to protect them against UV rays. Colorbond which is Zincalume’
color roof sheet range has a special paint that gets sprayed onto
the roof sheet. Colorbond roof sheets last up to 25 years before
the color starts looking ugly faded and all sheets fade the same
amount. Zincalume is a great product with attributes in it that
gives the aluminium a life span of between 20 and 30 years. This
was test in a open area next to the ocean in an marine environment.
Although Zincalume
has a aluminium color the Colorbond comes in many deferent shades
and finishes. Zincalume and Colorbond are both aluminium based.
Unlike steel sheets that have a thickness of 0.53mm and 0.58mm Zincalume
is only available in a thickness of 0.53mm. Because Zincalume is
made up of aluminium roofing contractors need to use a certain roof
bolt to fix the roof sheet down with. One of the biggest mistakes
roofing contractors make is when they use cheap hammer in roof bolts
and doing things cheap doesn’t pay off in the long run.
The reason
I’m so against those cheap roof nails is because they always
pull lose from the roof truss and your roof sheet either ends up
blowing off or water seeps in under it into your house. The other
biggie is that the self sealing washer which is suppose to do its
job leaks and has to be resealed with a Bitumen Plastic tar paste.
The best roof bolts on the market by a long mile are the Class 3
Self drillers and just saying that name gives me Goosebumps. They
are the best and that’s just it, nothing more to say. The Class
3 Self drillers has a small self sealing washer which you think
won’t even do the job but the deference is it’s made of
rubber not plastic so when it seals it seals.
Class 3 Self
drillers are also made to work with Zincalume roof sheets so neither
of the tow rust. If you are a roofing contractor or just a diy enthusiast
and would like to do your own roof I would strongly suggest you
use this product. It will simplify your life so much.
|
